Datasheet4U Logo Datasheet4U.com

T9AS1D12-12 - (T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay

Key Features

  • Up to 30 amp switching in SPST and 20 amp in SPDT arrangements.
  • Immersion cleanable(6), plastic sealed case available.
  • Meets UL 873 and UL 508 spacing.
  • 1/8" through air, 1/4" over surface.
  • Load connections made via 1/4" Q. C. terminals and safety wells accept insulated female Q. C. terminals (mounting codes 2 & 5).
  • UL Class F insulation system standard.
  • Well suited for various industrial, commercial and residential.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
T9AS1D12-12 General Purpose Relays TE
T9AS1D12-110 General Purpose Relays TE
T9AS1D12-15 General Purpose Relays TE
T9AS1D12-18 General Purpose Relays TE
T9AS1D12-24 General Purpose Relays TE

Other Datasheets by Siemens Semiconductor Group (now Infineon)

Part Number Description
T9AS1D12-xx Low Cost 30 Amp PC Board or Panel Mount Relay
T9AS1D22-xx (T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay
T9AS1L12-xx (T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay
T9AS5D12-xx (T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay
T9AS5D22-xx (T9A Series) Low Cost 30 Amp PC Board or Panel Mount Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com T9A series Low Cost 30 Amp PC Board or Panel Mount Relay File E22575 File LR15734 Features • Up to 30 amp switching in SPST and 20 amp in SPDT arrangements. • Immersion cleanable(6), plastic sealed case available. • Meets UL 873 and UL 508 spacing – 1/8" through air, 1/4" over surface. • Load connections made via 1/4" Q. C. terminals and safety wells accept insulated female Q. C. terminals (mounting codes 2 & 5). • UL Class F insulation system standard. • Well suited for various industrial, commercial and residential applications. Initial Dielectric Strength Between Open Contacts: 1,500V rms. Between Contacts and Coil: 2,500V rms. 6 kV surge using 1.2µs/50µs Impulse Wave or .5µs – 100kHz Ring Wave Contact Ratings @ 25°C with relay properly vented.