SA1021 Datasheet PDF

Silan SA1021

The SA1021 integrated radio receiver circuit is for portable radios, stereo as well as mono, where a minimum of periphery is important in terms of small dimensions and low cost. It is fully compatible for applications using the low-voltage micro tuning system (MTS). The IC has a frequency locked loop (FLL) system with an intermediate frequency of 76kHz.

Part No.	SA1021
Datasheet	SA1021 Download
Manufacturer	Silan
Description	FM RADIO RECEIVER
Buy	Stock & Price

DESCRIPTION

The selectivity is obtained by active RC filters. The only function to be tuned is the resonant frequency of the oscillator.Interstation noise as well as noise from receiving weak signals is reduced by a correlation mute system. Special precautions have been taken to meet local oscillator radiation requirements. Because of the low intermediate frequency, low pass filtering of the MUX signal is required to avoid noise when receiving stereo. 50kHz roll-off compensation, needed because of the low pass characteristic of the FLL, is performed by the integrated LF amplifier. For mono application this amplifier can be used to directly drive an earphone. The field-strength detector enables field-strength dependent channel separation control. SOP-16-225-1.27 ORDERING INFORMATION Part No. SA1021 * Mixer * IF amplifier/limiter * Mute circuit * Loop amplifier * LF amplifier for mono earphone amplifier or MUX filter Package SOP-16-225-1.27

FEATURES

* RF input stage * Local oscillator * Frequency detector * MTS compatible * Internal reference circuit * Field-strength dependent channel separation control facility.