SLG59H1302C Datasheet | Silego

Description The SLG59H1302C is a 130-V surge-protected, 28-V tolerant power splitter with two high-current switches and a 0.1 A capable LDO in 28-ball WLCSP. With independent control for each channel, the SLG59H1302C contains a 6 A capable, 12 mΩ n FET switch for the BUS-to-OUT path and a reverse-blocking 6 A capable, 24 mΩ n FET switch for the BUS-to-SYS path. An internal, “always ON” LDO is 0.1 A capable and can be used to supply power to downstream devices when the BUS terminal voltage is higher than 2.7 V. When the SYS terminal turns on, the IC’s push-pull PG output bees asserted. The SLG59H1302C is fully specified over the industrial -40 °C to 85 °C temperature range. Features - 130 V-tolerant TVS (IEC61000-4-5) - BUS-to-OUT n FET: 12 mΩ/6 A, 28 V tolerant - BUS-to-SYS n FET: 24 mΩ/6 A B2B RB - Always ON, BUS LDO: ±10% tol, 0.1 A capable - BUS UVLO & OVLO Protection - OVP Response Time: 200 ns - Push-pull PG (Power Good) Output - Thermal Shutdown Protection - Active-HIGH IC Shutdown Input - Active-LOW ON1 Input (BUS-to-OUT) - Active-HIGH ON2 Input (BUS-to-SYS) - 28-ball CSP, 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch - Pb-Free / Halogen-Free / Ro HS pliant Packaging Pin Configuration Pin A1 Index Mark 1 SD BUSOK ON1 OUT OUT BUS ON2 OUT BUS BUS BUS SYS BUS BUS BUS SYS BUS BUS BUS SYS BUS BUS BUS GND GND GND GND G (Laser Marking View) 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch Applications - Wearable Device - Tablet PCs and Smartphones Block...