SLG6M6001V
Overview
The SLG6M6001V is a 3.8 mΩ 10 A programmable, single-channel load switch that is able to switch 1 to 5 V power rails. A noise tolerant analog current mirror signal is provided for high-accuracy reporting over the full load range.
- 2 x 3 mm STQFN 18L FC package (6 fused pins for drain and 6 fused pins for source)
- Logic level ON pins able to support 1.05 V CMOS Logic
- 3.8 mΩ RDSONwhile supporting 10 A
- Discharges load when off
- Two Over Current Protection Modes (Short Circuit/Active)
- Short Circuit Current Limit
- Active Current Limit
- Over Temperature Protection
- NVM programmable configuration for Ramp Rate, Discharge, Logic Cell, Temperature Limit, and Current Limit
- High / Low Current Select
