71M6543G Datasheet | Silergy

DESCRIPTION The 71M6543F/71M6543G are 4th-generation polyphase metering systems-on-chips (So Cs) with a 5MHz 8051-patible MPU core, low-power real-time clock (RTC) with digital temperature pensation, flash memory, and LCD driver. Our Single Converter Technology® with a 22-bit delta-sigma ADC, seven analog inputs, digital metrology temperature pensation, precision voltage reference, and a 32-bit putation engine (CE) supports a wide range of metering applications with very few external ponents. The 71M6543F/71M6543G support optional interfaces to the 71M6xx3 series of isolated sensors that offer BOM cost reduction, immunity to magnetic tamper, and enhanced reliability. The ICs feature ultra-low-power operation in active and battery modes, 5KB shared RAM, and 64KB (71M6543F) or 128KB (71M6543G) of flash memory, which can be programmed with code and/or data during meter operation. A plete array of code development tools, demonstration code, and reference designs enable rapid development and certification of meters that meet all ANSI and IEC electricity metering standards worldwide. Shunt Current Sensors C NEUTRAL B LOAD POWER SUPPLY NEUTRAL Note: This system is referenced to Neutral 3x 71M6xx3 Resistor Dividers 71M6xx3 71M6xx3 71M6xx3 Pulse Transformers AMR IR HOST MUX and ADC IADC0 IADC1 }IN- VADC10 (VC) IADC6 IADC7 }IC VADC9 (VB) IADC4 IADC5 }IB VADC8 (VA) IADC2 IADC3 }IA V3P3A V3P3SYS GNDA GNDD PWR MODE CONTROL WAKE-UP 71M6543F/ REGULATOR VBAT VBAT_RTC TEMPERATURE BATTERY SENSOR MONITOR VREF SERIAL PORTS TX RX MODUL- RX ATOR TX POWER FAULT PARATOR SPI...