Datasheet4U Logo Datasheet4U.com

AN-SY6280 - Low Loss Power Distribution Switch

Description

The SY6280 develops ultra-low Rds(on) switch with programmable current limiting to protect the power source from over current and short circuit conditions.

It integrates the over temperature protection and discharges the output capacitor during the shutdown.

Features

  • Distribution voltages: 2.4V to 5.5V.
  • Programmable current limit.
  • Enable polarity: active high.
  • Over temperature shutdown and automatic retry.
  • Reverse blocking (no body diode).
  • At shutdown, OUT can be forced higher than IN.
  • Automatic outpu.

📥 Download Datasheet

Datasheet preview – AN-SY6280

Datasheet Details

Part number AN-SY6280
Manufacturer Silergy
File Size 291.67 KB
Description Low Loss Power Distribution Switch
Datasheet download datasheet AN-SY6280 Datasheet
Additional preview pages of the AN-SY6280 datasheet.

📁 Similar Datasheet

  • AN-0001 - Surface Mount Assembly (ANADIGICS)
  • AN-0002 - Biasing Circuits and Considerations (ANADIGICS)
  • AN-0003 - Thermal Considerations (ANADIGICS)
  • AN-0004 - 12mm Tape (ANADIGICS)
  • AN-1090 - Controller Dynamics/Tuning (International Rectifier)
  • AN-136 - A NEW GENERATION (Integrated Device Technology)
  • AN-1434 - Crest Factor Invariant RF Power Detector (National Semiconductor)
  • AN-203 - I/O Expansion (ZBasic)
  • AN-203 - Using the AD2S80A Series Resolver-to-Digital Converters As a Controller Transformer (Analog Devices)
  • AN-214 - Transmission Line Drivers/Receivers (National Semiconductor)
Other Datasheets by Silergy
  • AN-SY7152 - High Efficiency 1MHz 2A Step-Up Regulator
  • AN-SY8003 - 1MHz Synchronous Step Down Regulator
  • AN-SY8003A - 1MHz Synchronous Step Down Regulator
  • AN-SY8063 - 3.5A Synchronous Step Down Regulator
  • AN-SY8105 - Synchronous Step Down Regulator
  • AN-SY8368A - Synchronous Step Down Regulator

Full PDF Text Transcription

Click to expand full text
Application Note: AN_SY6280 Low Loss Power Distribution Switch TARGET DESIGN SPECIFICATION Preliminary Spec General Description The SY6280 develops ultra-low Rds(on) switch with programmable current limiting to protect the power source from over current and short circuit conditions. It integrates the over temperature protection and discharges the output capacitor during the shutdown. In case the output is pulled higher than the input voltage under the shutdown, the SY6280 can block the current flowing from the output to the input. Ordering Information SY6280□(□□)□ Temperature Code Package Code Optional Spec Code Temperature Range: -40°C to 85°C Ordering Number Package type SY6280AAC SOT23-5 Note ---- Features • Distribution voltages: 2.4V to 5.
Published: |