Silergy SY62510
The SY62510 is a fully integrated 1-series Lithium-ion/Li-Pol battery gauge with authentication. The device communicates via an I2C compatible interface and combines a lowpower, high-speed micro-controller, integrated flash memory, peripherals and proprietary algorithm for accurate capacity gauging. The device is suitable for using on the host-side or can be integrated in battery packs.| Part No. | SY62510 |
|---|---|
| Datasheet | SY62510 Download |
| Manufacturer |  Silergy |
| Description | Lithium-ion/Li-Pol Battery Gauge |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The SY62510 provides the battery information such as: remaining battery capacity (mAh), state-of-charge (%, SOC), state-of-health (%, SOH), battery voltage (mV), battery current (mA) and battery temperature (℃). 3APPLICATIONS
● Portable Multimedia Players● Handheld Terminals
● Portable Medical Device 4 Typical
APPLICATIONS
4.1 SY62510VXS (CSP) 2FEATURES
● Operating Voltage: 2.2V to 5.5V● Operating Current: 50 µA (Typ.)
● Sleep Mode Current: 12 µA (Typ.)
● Patented gauge algorithm: accurate SOC, SOH
● Automatic compensation for temperature, age, rate and self-discharge
● Dual ADC for Simultaneous Current and Voltage Measurements
● On-chip temperature sensor for monitoring system temperature
● External temperature-measurement network
● Low-side current sense
● Supports min 1mΩ current sense resistors
● SHA-256 and SHA1 authentication
● Diagnostic lifetime data monitor
● 400-kHz I2C bus communications interface
● Package: CSP 1.655mm×1.802mm-9PIN DFN 2.5mm×4mm-12PIN DS_SY62510 Rev.1.0 © 2022 Silergy Corp.
