Silicon Laboratories C8051F330
the C8051F330/1/2/3/4/5 devices are truly stand-alone System-on-a-Chip solutions. The Flash memory can be reprogrammed even in-circuit, providing non-volatile data storage, and also allowing field upgrades of the 8051 firmware. The on-chip Silicon Labs 2-Wire (C2) Development Interface allows non-intrusive (uses no on-chip resources), full speed, in-circuit debugging using the production MCU installed in the final application.| Part No. | C8051F330 |
|---|---|
| Datasheet | C8051F330 Download |
| Manufacturer |  Silicon Laboratories |
| Description | Mixed Signal ISP Flash MCU |
| Buy | Stock & Price |
Analog Peripherals - 10-Bit ADC (‘F330/2/4 only)
● Up to 200 ksps
● Up to 16 external single-ended or differential inputs
● VREF from internal VREF, external pin or VDD
● Internal or external start of conversion source
● Built-in temperature sensor - 10-Bit Current Output DAC (‘F330 only) - Comparator
● Programmable hysteresis and response time
● Configurable as interrupt or reset source
● Low current (0.4 µA) On-Chip Debug - On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required) - Provides breakpoints, single stepping, inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Low cost, complete development kit Supply Voltage 2.7 to 3.6 V - Typical operating current: 6.4 mA at 25 MHz; 9 µA at 32 kHz - Typical stop mode current: 0.1 µA Temperature Range: –40 to +85 °C C8051F330/1/2/3/4/5 Mixed-Signal ISP Flash MCU High Speed 8051 µC Core - Pipelined instruction architecture; ex...
● Up to 200 ksps
● Up to 16 external single-ended or differential inputs
● VREF from internal VREF, external pin or VDD
● Internal or external start of conversion source
● Built-in temperature sensor - 10-Bit Current Output DAC (‘F330 only) - Comparator
● Programmable hysteresis and response time
● Configurable as interrupt or reset source
● Low current (0.4 µA) On-Chip Debug - On-chip debug circuitry facilitates full speed, nonintrusive in-system debug (no emulator required) - Provides breakpoints, single stepping, inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Low cost, complete development kit Supply Voltage 2.7 to 3.6 V - Typical operating current: 6.4 mA at 25 MHz; 9 µA at 32 kHz - Typical stop mode current: 0.1 µA Temperature Range: –40 to +85 °C C8051F330/1/2/3/4/5 Mixed-Signal ISP Flash MCU High Speed 8051 µC Core - Pipelined instruction architecture; ex...
