Datasheet4U Logo Datasheet4U.com

CP2105 - SINGLE-CHIP USB TO DUAL UART BRIDGE

Key Features

  • Data formats supported: - Data bits: 5, 6, 7, and 8 - Stop bits: 1, 1.5, and 2 - Parity: odd, even, mark, space, no parity.
  • Baud rates: 300 bps to 2.0 Mbps.
  • 320 Byte receive and transmit buffers.
  • Two GPIO signals for status and control.
  • RS-485 mode with bus transceiver control Standard UART Interface Features.
  • Data format: 8 data bits, 1 Stop bit.
  • Parity: Even, Odd, No parity.
  • Baud rates: 2400 bps to 921600 bps.
  • 288 Byte receive and transmit buffers.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CP2100 TRANSHIELLD CP2000 SERIES ETC
CP2100A TRANSHIELLD CP2000 SERIES ETC
CP2101 Single-Chip USB to UART Bridge ETC
CP2101-7R 120...195 Watt DC-DC Converters Power-One
CP2108 USB to Quad UART Bridge Controller Silicon Labs

Other Datasheets by Silicon Laboratories

Part Number Description
CP2101 Single-Chip USB to UART Bridge
CP2102 SINGLE-CHIP USB TO UART BRIDGE
CP2102N USB-to-UART bridge controller
CP2103 SINGLE-CHIP USB TO UART BRIDGE
CP2104 SINGLE-CHIP USB-TO-UART BRIDGE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CP2105 SINGLE-CHIP USB TO DUAL UART BRIDGE Single-Chip USB to Dual UART Data Transfer Integrated USB transceiver; no external resistors required Integrated clock; no external crystal required Integrated 296-Byte One-Time Programmable ROM for storing customizable product information On-chip power-on reset circuit On-chip voltage regulator: 3.45 V output USB Peripheral Function Controller USB Specification 2.0 compliant; full-speed (12 Mbps) USB Suspend states supported via SUSPEND pins Two UART Interfaces (“Enhanced” and “Standard”) Flow control options: - Hardware (CTS / RTS) - Software (X-On / X-Off) - No flow control Configurable I/O (1.