Datasheet4U Logo Datasheet4U.com

Si1145-M01 - PROXIMITY/UV/AMBIENT LIGHT SENSOR MODULE

General Description

Portable consumer electronics Touchless switches Touchless sliders Consumer electronics Display backlighting control The Si1145/46/47-M01 is a low-power, reflectance-based, proximity, UV Index and ambient light module with integrated single IR LED, two additional LED

Key Features

  • Integrated infrared proximity detector.
  • Accurate lux measurements with IR.
  • Proximity detection adjustable from correction algorithm under 1 cm to over 50 cm.
  • Industry's lowest power consumption.
  • Three independent LED drivers.
  • 1.71 to 3.6 V supply voltage.
  • 15 current settings from 5.6 mA to.
  • 9 µA average current (LED pulsed 360 mA for each LED driver 25.6 µs every 800 ms at 180 mA.
  • 25.6 µs LED driver pulse width plus 3 µA Si1145/46/47-M01.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SI1101 One Component High Thermal Conductive Grease SEPUNA
SI1125HD 25W Dual Channel Amp Sanken Electric
SI1128 High Precision CC/CV Primary-Side Controller SANY Semiconductor
SI1130H SI1130H Quick guide Sanken Electric
SI1000 (SI Series) SNAP-IN MOUNT ALUMINUM ELECTROLYTIC NTE Electronics

Other Datasheets by Silicon Laboratories

Part Number Description
Si1145 PROXIMITY/UV/AMBIENT LIGHT SENSOR
SI1141 PROXIMITY/AMBIENT LIGHT SENSOR IC
Si1141-M01 PROXIMITY/AMBIENT LIGHT SENSOR MODULE
SI1142 PROXIMITY/AMBIENT LIGHT SENSOR IC
Si1142-M01 PROXIMITY/AMBIENT LIGHT SENSOR MODULE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Si1145/46/47-M01 PROXIMITY/UV/AMBIENT LIGHT SENSOR MODULE WITH I2C INTERFACE Features  Integrated infrared proximity detector Accurate lux measurements with IR Proximity detection adjustable from correction algorithm under 1 cm to over 50 cm  Industry's lowest power consumption Three independent LED drivers 1.71 to 3.6 V supply voltage 15 current settings from 5.6 mA to 9 µA average current (LED pulsed 360 mA for each LED driver 25.6 µs every 800 ms at 180 mA 25.