Si8600AB-AS Datasheet | Silicon Labs

Si860x Data Sheet Bidirectional I2C Isolators with Unidirectional Digital Channels The Si860x series of isolators are single-package galvanic isolation solutions for I2C and SMBus serial port applications. These products are based on Silicon Labs proprietary RF isolation technology and offer shorter propagation delays, lower power consumption, smaller installed size, and more stable operation with temperature and age versus opto couplers or other digital isolators. All devices in this family include hot-swap, bidirectional SDA and/or SCL isolation channels with open-drain, 35 m A sink capability that operate to a maximum frequency of 1.7 MHz. The 8-pin version (Si8600) supports bidirectional SDA and SCL isolation; the Si8602 supports bidirectional SDA and unidirectional SCL isolation, and the 16-pin versions (Si8605, Si8606) feature two unidirectional isolation channels to support additional system signals, such as interrupts or resets. All versions contain protection circuits to guard against data errors when an unpowered device is inserted into a powered system. Small size, low installed cost, low power consumption, and short propagation delays make the Si860x family the optimum solution for isolating I2C and SMBus serial ports. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications - Isolated I2C, SMBus - Isolated digital power supply muni- cations - Power over Ethernet - Motor Control Systems - Hot-swap applications - Intelligent Power systems Automotive Applications - On-board chargers - Battery management systems - Charging stations - Traction inverters - Hybrid Electric Vehicles - Battery Electric Vehicles Safety Regulatory Approvals - UL 1577 recognized - Up to 5000 VRMS for 1 minute - CSA ponent notice 5A approval - IEC 60950-1, 61010-1,...