ZM5202 Datasheet | Silicon Labs

Features - Pad and pin patible with the ZM3102 and ZM4102 - ITU G.9959 pliant Module The Silicon Labs ZM5202 module is a low-cost fully integrated Z-Wave module in a small 12.5mm x 13.6mm x 1.9mm form factor. It is an ideal solution for home control applications such as access control, appliance control, AV control, building automation, energy management, lighting, security, and sensor networks in the “Internet of Things”. It contains all the required passive ponents, including the crystal and a SAW filter to provide a plete Z-Wave system. The ZM5202 module remains pad and pin patible with the ZM3102 and the ZM4102 Z-Wave modules. The ZM5202 module is based on an 8-bit 8051 CPU core, which is optimized to handle the data and link management requirements of a Z-Wave node. The patented Z-Wave protocol supports automatic retransmissions, collision avoidance mechanisms, frame acknowledgements, frame CRCs, frequency agility, and full mesh routing to ensure a highly reliable and robust wireless munication solution. An integrated baseband controller, sub-1 GHz radio transceiver, a prehensive set of hardware peripherals, 16k B of SRAM, and 128k B of Flash memory is available for OEM applications and the Z-Wave protocol stack. - Optimized 8051 CPU Core - 128k B Flash - 16k B SRAM - UART with speed up to 230.4kbps - SPI with speed up to 8MHz - 2 Interrupt Inputs - 4-channel 12/8-bit rail-to-rail ADC with VDD/internal/external voltage reference - PWM Output - 10 General Purpose IOs - Hardware AES-128 security engine - 1000 step dimmer (TRIAC/FET) - Power-On-Reset/Brown-out Detection - Supply voltage range from 2.3V to 3.6V for optional battery operation - TX mode current typ. 36m A@0d Bm - RX mode current typ. 32m A - Normal mode current typ. 15m A - Sleep mode current typ. 1µA - Wake-up timer current typ. 700n A - Less than 1ms cold start-up time Radio Transceiver - Receiver sensitivity with SAW filter down to -103d Bm @ 9.6kbps - Transmit power with SAW filter up to +4d Bm - Z-Wave...