25LF020A
Key Features
- Single 3.0-3.6V Read and Write Operations
- Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
- 33 MHz Max Clock Frequency
- Superior Reliability - Endurance: 100,000 Cycles (typical) - Greater than 100 years Data Retention
- Low Power Consumption: - Active Read Current: 7 mA (typical) - Standby Current: 8 µA (typical)
- Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks
- Fast Erase and Byte-Program: - Chip-Erase Time: 70 ms (typical) - Sector- or Block-Erase Time: 18 ms (typical) - Byte-Program Time: 14 µs (typical)
- Auto Address Increment (AAI) Programming - Decrease total chip programming time over Byte-Program operations
- End-of-Write Detection - Software Status
- Hold Pin (HOLD#) - Suspends a serial sequence to the memory without deselecting the device
