Silicon Storage Technology SST26WF032
The SST26WF032 Serial Quad I/O™ (SQI™) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. The device’s high performance and small footprint make it the ideal choice for mobile handsets, Bluetooth headsets, optical disk drives, GPS applications and other portable electronic products. Operating at frequencies reaching 80 MHz, the SST26WF032 enables minimum latency execute-inplace (XIP) capability without the need for code shadowing on an SRAM.| Part No. | SST26WF032 |
|---|---|
| Datasheet | SST26WF032 Download |
| Manufacturer |  Silicon Storage Technology |
| Description | 1.8V Serial Quad I/O (SQI) Flash Memory |
| Buy | Stock & Price |
FEATURES
:● Single Voltage Read and Write Operations – 1.65-1.95V
● Serial Interface Architecture – Nibble-wide multiplexed I/O’s with SPI-like serial command structure - Mode 0 and Mode 3 – Single-bit, SPI backwards compatible - Read, High-Speed Read, and JEDEC ID Read
● High Speed Clock Frequency – 80 MHz - 320 Mbit/s sustained data rate
● Burst Modes – Continuous linear burst – 8/16/32/64 Byte linear burst with wrap-around
● Superior Reliability – Endurance: 100,000 Cycles – Greater than 100 years Data Retention
● Low Power Consumption: – Active Read current: 12 mA (typical @ 80 MHz) – Standby Current: 8 µA (typical)
● Fast Erase and Byte-Program: – Chip-Erase time: 35 ms (typical) – Sector-/Block-Erase time: 18 ms (typical)
● Page-Program – 256 Bytes per page – Fast Page Program time in 1 ms (typical)
● End-of-Write Detection – Software polling the BUSY bit in status register
● Flexible Erase Capability – Uniform 4 KByte sectors – Four 8 KByte top and bottom parameter overlay block...
