Silicon Storage Technology SST58LM096
This product is well suited for solid state mass storage applications offering new and expanded functionality while enabling cost effective designs. The ADM is a solid state disk drive that is designed to replace conventional IDE hard disk drive and can be plugged into a standard IDE connector commonly found in desktop or portable PC systems.| Part No. | SST58LM096 |
|---|---|
| Datasheet | SST58LM096 Download |
| Manufacturer |  Silicon Storage Technology |
| Description | ATA-Disk Module |
| Buy | Stock & Price |
FEATURES
:● ATA/IDE standard interface – 512 Bytes per sector – ATA command set compatible – Selectable Master/Slave Operation – Support Data Transfer Speed up to PIO Mode-4
● 8, 16, 24, 32, 48, 64, 96, 128, and 192 MByte capacities
● Standard Female IDE Connector – 40-pin and 44-pin
● Single Voltage Read and Write Operation – 5.0V-only for SST58SMxxx – 3.3V-only for SST58LMxxx
● Supports 5.0-Volt or 3.3-Volt Read and Write – 4.5-5.5V or 3.135-3.465V for Commercial
● Low Power Consumption – Active mode: 35 mA/55 mA (3.3V/5.0V) (typical) – Sleep mode: 100 µA/150 µA (3.3V/5.0V) (typical)
● Sustained Write Performance – Up to 1.4 MB/sec (host to flash)
● Extended Data Protection and Security – WP# pin for Data Protection – Factory-Programmed, 20-Byte Unique ID number
● Controller Overhead Command to DRQ – Less than 0.5 ms
● Zero Power Data Retention – Batteries not required for data storage
● Start Up Time – Sleep to read: 200 ns (typical) – Sleep to write: 200 ns (typical) – Power-on to...
