XT4054 Datasheet | Silinktek

Standalone Linear Li-Ion Battery Charger with Thermal Regulation - General Description The XT4054 is a plete constant-current /constant -voltage linear charger for single cell lithium-ion batteries. Its Thin SOT package and low external ponent count make the XT4054 ideally suited for portable applications. Furthermore, the XT4054 is specifically designed to work within USB power specifications. No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The XT4054 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the XT4054 automatically enters a low current state, dropping the battery drain current to less than 2A. The XT4054 can be put into shutdown mode, reducing the supply current to 25µA. The BAT pin has a 7KV ESD(HBM) capability. Other Features include charge current monitor, under-voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage. - Features - Programmable Charge Current Up to 500m A - No MOSFET, Sense Resistor or Blocking Diode Required - plete Linear Charger in Thin SOT Package for single Cell Lithium-Ion Batteries - Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating - Charges Single Cell Li-Ion Batteries Directly from USB Port - y - Charge Current Monitor Output for Gas Gauging - Automatic Recharge - Charge Status Output Pin - C/10 Charge Termination - 25A Supply Current in Shutdown - 2.9V Trickle Charge Threshold (XT4054) - Soft-Start...