Datasheet4U Logo Datasheet4U.com

SLMi8233C - Dual Channel Gate Driver

Description

The SLMi823xC isolated driver family is an isolated dual channel gate driver with different configurations.

The SLMi8233/4C are configured as high-side/lowside drivers, while the SLMi8235C are configured as dual drivers.

📥 Download Datasheet

Datasheet Details

Part number SLMi8233C
Manufacturer Sillumin
File Size 735.43 KB
Description Dual Channel Gate Driver
Datasheet download datasheet SLMi8233C Datasheet

📁 Similar Datasheet

  • SLM-1251 - High Luminance Type Surface Mount LEDs (Rohm)
  • SLM-13 - Surface Mount LEDs (Rohm)
  • SLM-13xx - Molded Package Chip LEDs (Rohm)
  • SLM-20T - High Linearity Low Noise Amplifier Module (Sirenza Microdevices)
  • SLM-23 - Surface Mount LEDs (Rohm)
  • SLM-23xx - Molded Package Chip LEDs (Rohm)
  • SLM-245 - High Luminance Type Surface Mount LEDs (Rohm)
  • SLM-x-xxx - LED Assemblies (Bivar)
  • SLM100N03T - 30V N-Channel MOSFET (Msemitek)
  • SLM120N03G - 30V N-Channel MOSFET (Msemitek)
Other Datasheets by Sillumin

Full PDF Text Transcription

Click to expand full text
SLMi823xC Dual Channel 4A/40V, 5.0kVRMS Isolated Gate Driver GENERAL DESCRIPTION FEATURE The SLMi823xC isolated driver family is an isolated dual channel gate driver with different configurations. The SLMi8233/4C are configured as high-side/lowside drivers, while the SLMi8235C are configured as dual drivers. The peak source output current is 4.0A and the peak sink output current is 7.0A. Programmable dead time (DT) feature is available in SLMi8233/4C. Pulling high the DIS pin shuts down both outputs simultaneously, and allows for normal operation when the DIS pin is open or pulled low. As a fail-safe measure, primary-side logic failures force both outputs low. The VDDA and VDDB supply voltage are up to 40 V.
Published: |