AG2130
AG2130 is Low Cost PSTN Interface manufactured by Silver.
FEATURES
- A highly featured PSTN Interface (COIC, FXO, DAA, Trunk Interface) in a single 12mm high SIL device.
- +5V or +3.3V supply.
V1.4 September 2006 Data Sheet
- Transformer isolation providing high mon-mode rejection (CMRR) for use in un-grounded systems.
- Highly integrated with on-board loop switch and diode bridge.
- Loop start circuit, ringing detect, detection and parallel phone detect.
- On-hook reception.
- Meets requirements of FCC Pt68.
- Approved to:
EN 60950-1:2001 IEC60950-1: First Edition 2001 AS/NZ60950-1: 2003 UL60950-1: 2003 1st Edition CSA 22.2 No.60950-1-03 1st Edition
- line
Low cost power cross protection.
- Programmable d.c. mask, line and network impedances, allows use in any market.
- Silver Tele “design-in” assistance.
DESCRIPTION
The Ag2130 is a self-contained highly integrated PSTN Interface Circuit in a single SIL module, which plies with ROHS requirements. In addition to the features listed, the Ag2130 allows flexible programming of many functions, including the dc voltage mask and impedances. The Ag2130 meets international safety and regulatory requirements. The device requires a minimum of external ponents and has been specified for ease of use, to allow reduced time to market. The Ag2130 is designed for all applications, including those where there is a high level of mon mode interference, such as PABX, long loop applications and systems without a ground connection.
© Silver Tele 2006
V1.4 September 2006 Data Sheet
LOW COST PSTN INTERFACE
Ordering Information
Ag2130S Fully featured Trunk in SIL package (Ro HS pliant)
Silver
T EL EC O M
Figure 1: Ag2130S
- SIL Packaging Format
VCC DMa DMb
ZT1
ZT2
Power Management 2-4 Wire Converter
VTR VOUT VIN
Tip Ring
Line Termination & Loop Switch
RS Supervision LSC
Anode
Gate
Cathode
Figure 2: Functional Block...
