Simcom SIM300
the SIM300 AT command interface defaults Modify the description of ata Modify the description of atd Modify the description of atd> Modify the parameter range from 0 to 10 Modify the parameter range from 1 to 255 Modify the parameter range to 1-254 and revise carries to carrier Add a table to describe result codes and their numeric equivalents Modify the description of atx SIM300_ATC_V1.06 3 04.12.2006 SIM300 AT Commands Set 2.2.29 at&c 2.2.30 at&d 2.2.35 at+ds 2.2.36 at+gcap 2.2.43 at+ifc 2.2.45 at+ipr Modify the description of at&c Modify the description of at&d Modify the value range of...| Part No. | SIM300 |
|---|---|
| Datasheet | SIM300 Download |
| Manufacturer |  Simcom |
| Description | AT Commands Set |
| Buy | Stock & Price |
DESCRIPTION
” Version 1.02 Now document: “SIM300 AT InterfaceDESCRIPTION
” Version 1.03 Version Chapter What is new V1.01 4.3 4.2.4at+cmgr 7.1 Add new commands: AT+SMALPHAID AT+SMEXTRAINFO AT+SMEXTRAUNSOL Add a new parameter <mode> Remove AT+CGMSCLASS in the overview V1.02 7.2.9 at+csns 7.2.25 at+ceng 3.2.15 at+chld Change CSNS mode 2 to FAX and 4 to data Change the parameter <n> to <mode> Change the definition “1X Terminate the active call number X (X= 1-7)” to “1X Terminate the specific call number X (X= 1-7)( active, waiting or held)” V1.03 8.2.23at+cipmode Select TCPIP Application Mode 8.2.24at+cipccfg Configure transparent transfer mode V1.04 7.2.1 at+ echo 7.2.29 at+ cmte 7.2.30 at+ csdt Change the value of the parameter <channel> AT+CMTE AT+CSDT V1.05 2.2.44 at+ilrr 2.2.45 at+ipr 10.1Profile Commands 7.2.31 at+cmgda 7.2.32 at+simtone 7.2.33 at+ccpd 3.2.19 at+clck 3.2.31 at+cpwd 7.2.34 at+cgid Add a new value of IPR(0) Add a new value of IPR and some information (refer to 2.2.45.1...
