Sinartis OM02
the OM02 camera is delivered in a kit with the frame grabber Sincapt-II for video capture and image transfer in real time to a host PC memory by standard PCI interface (Peripheral Component Interface). The CCD cameras OM02 are designed for the inspection and the alignment with high precision of PCBs (Printed Circuit Boards) during their manufacturing process (layers stacking, pressing, cutting, drilling, etc.).| Part No. | OM02 |
|---|---|
| Datasheet | OM02 Download |
| Manufacturer | Sinartis |
| Description | Special CCD Cameras |
| Buy | Stock & Price |
OM02 HIRES Special CCD Cameras for PCB Inspection w w w .D a ta Sh t e e 4U . m o c Image Processing Technologies TECHNICAL SPECIFICATIONS CCD Camera
● Sensor:
● Standard video:
● Number of pixel:
● Scanning System:
● Video out:
● Shutter:
● S/N:
● Iris:
● AGC: CCD 1/3” CCIR B/W 795 Hor. x 596 Ver. 625 lines 50 fields/sec 1 Volt p-p / 75 Ohm 1/50—1/120.000 automatic 52 –60 dB (AGC off) automatic esp. ON /OFF OM02 HIRES CCD camera In an anodized aluminum block which is vibration resistant and dust protected are mounted a CCD camera, a telecentric objective, a near infrared illuminator and an optical filter which has a transmission peak at the illuminator wavelength. The illuminator radiation passes through the filter but the camera receives only the backscattered light from the object of the same wavelength. So, the visible environmental light is cut-off. The connections for power in and signal out are made with connectors fixed by screws. The use of a telecentric optics is very importa...
● Sensor:
● Standard video:
● Number of pixel:
● Scanning System:
● Video out:
● Shutter:
● S/N:
● Iris:
● AGC: CCD 1/3” CCIR B/W 795 Hor. x 596 Ver. 625 lines 50 fields/sec 1 Volt p-p / 75 Ohm 1/50—1/120.000 automatic 52 –60 dB (AGC off) automatic esp. ON /OFF OM02 HIRES CCD camera In an anodized aluminum block which is vibration resistant and dust protected are mounted a CCD camera, a telecentric objective, a near infrared illuminator and an optical filter which has a transmission peak at the illuminator wavelength. The illuminator radiation passes through the filter but the camera receives only the backscattered light from the object of the same wavelength. So, the visible environmental light is cut-off. The connections for power in and signal out are made with connectors fixed by screws. The use of a telecentric optics is very importa...
