SP4415 - Electroluminescent Lamp Driver with Selectable Level Outputs

Product Overview

Sipex Corporation

Part number	SP4415
Manufacturer	Sipex Corporation
File Size	358.04 KB
Description	Electroluminescent Lamp Driver with Selectable Level Outputs
Datasheet	SP4415 Datasheet
Additional preview pages of the SP4415 datasheet.

The SP4415 is a single chip DC-AC converter ideally suited for driving electroluminescent panels to four intensity levels.

The SP4415 is capable of converting DC input voltages as low as 2.2V into any of four AC voltage levels which can be set via external switch.

high impedance (50 MΩ), low capacitance (2.5pF) and 200mV sensitivity. The external clock should range from (VDD-1V) to ground. The SP4415 is optimized for 32,768Hz clock signals and is allowed to vary from 20 kHz to 60kHz. The externally supplied clock signal provides the circuit with a clock source used to control the charge and discharge phases for the coil and lamp. The suggested oscillator frequency is 32,768Hz . This clock frequency is internally divided to create two internal control sign.

SP4412 - N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP4412A - Electroluminescent Lamp Driver (Sipex)
SP4414 - Low Cost Electroluminescent Lamp Driver (Sipex)
SP4416 - Electroluminescent Lamp Driver with 4-Level Light Intensity Selection Feature (Sipex)
SP44-6 - 44MHz SAW Filter 6MHz Bandwidth (SIPAT)
SP44-8 - SAW Filter Electrical Characteristic (SIPAT)
SP4400 - Dual N-Channel Enhancement Mode Field Effect Transistor (SamHop Microelectronics)
SP4401 - P-Channel Enhancement Mode Field Effect Transistor (SamHop)
SP4403 - Low Voltage Electroluminescent Lamp Driver (Sipex)
SP4405 - Low Voltage Electroluminescent Lamp Driver with Regulated Output Voltage (Sipex)

Other Datasheets by Sipex Corporation

Published: Sep 21, 2006 |