SP810 Datasheet | Sipex Corporation

SP809 / SP810 3 Pin Microprocessor Supervisor Circuit Features - Ultra Low Supply Current 1µA (typ.) - Guaranteed Reset valid to VCC = 0.9V - 140 ms Min. Power-On Reset Pulse Width - Internally Fixed Threshold 2.3V, 2.6V, 2.9V, 3.1V, 4.0V, 4.4V, 4.6V - Tight Voltage Threshold Tolerance: 1.5% - Offered in a 3 Pin SOT-23 Package VCC SP809 3 Pin SOT-23 GND RESET Now Available in Lead Free Packaging APPLICATIONS - Portable Electronic Devices - Electrical Power Meter - Digital Still Camera - µP Power Monitoring Part Number SP809N SP809 SP810 Output Type Open-Drain Active Low Push-Pull Active Low Push-Pull Active High DESCRIPTION The SP809/SP810 are low power microprocessor (µP) supervisory circuits used to monitor power supplies in µP and digital systems. They provide applications with benefits of circuit reliability and low cost by eliminating external ponents. If the VCC supply voltage falls below preset threshold then a reset signal is asserted for at least 140ms after VCC has risen above the reset threshold. Both the SP809 and SP810 were designed with a reset parator to help identify invalid signals, which last less than 140ms. The only difference between them is that they have an active-low RESET output and active-high RESET output, respectively. Low supply current (1µA) makes SP809/SP810 ideal for portable equipment. The devices are available in 3 pin SOT-23 package. TYPICAL APPLICATION CIRCUIT VCC VCC VCC µP RESET (RESET) GND Push-Pull output RESET GND Date: 5/02/06 Rev B SP809/810, 3 Pin Microprocessor Supervisor Circuit © Copyright 2006 Sipex...