SPX29151 Datasheet | Sipex Corporation

FEATURES - Adjustable Output Down to 1.25V - 1% Output Accuracy - Output Current of 1.5A - Low Dropout Voltage of 390m V @ 1.5A - Extremely Tight Load and Line Regulation - Extremely Fast Transient Response - Reverse-Battery Protection - Zero Current Shutdown (5 pin version) - Error Flag Signal Output for Out of Regulation State (5 pin version) - Standard TO-220 and TO-263 Packages APPLICATIONS - Powering VGA and Sound Cards - LCD Monitors - USB Power Supplies - Power PC™ Supplies - SMPS Post Regulators - High-efficiency “Green” puter Systems - High-efficiency Linear Power Supplies - Portable Instrumentation - Constant Current Regulators - Adjustable Power Supplies - Battery Chargers DESCRIPTION The SPX29150/51/52/53 are 1.5A, highly accurate voltage regulators with a low dropout voltage of 390m V (typical) @ 1.5A. These regulators are specifically designed for low voltage applications that require a low dropout voltage and a fast transient response. They are fully fault protected against over-current, reverse battery, and positive and negative voltage transients. On-chip trimming adjusts the reference voltage to 1% initial accuracy. Other features in the 5 pin versions include Enable and Error Flag. The SPX29150/51/52/53 is offered in 3-pin and 5-pin TO-220 & TO-263 packages. For a 3A version, refer to the SPX29300 data sheet. TYPICAL APPLICATION CIRCUITs VIN + 6.8µ F 1 SPX29150 3 2 + 10µ F VOUT VIN + 6.8µ F 1 SPX29152 4 2 GND 3 5 ADJ VOUT + R1 10µ F R2 Figure 1. Fixed Output Linear Regulator Rev A 8/15/06 Figure 2. Adjustable Output Linear Regulator © Copyright 2006 Sipex Corporation SP29150/51/52/53 1.5A Low Dropout Voltage Regulator ABSOLUTE MAXIMUM RATINGS Storage Temperature Range -65°C to +150°C Operating Junction Temperature Range -40°C to +125°C Input Voltage (Note 7) 16V at Vin=Vout + 1V and Iout = 10m A, Cin = 6.8µF, Cout = 10µF, Ta = 25°C, unless otherwise...