SP1234 Datasheet | Sipex

FEATURES - This information is provided by the Design Team at time PDS is generated VIN 1 10 VOUT1 - PDS (Product Definition Spec ) and Advance Datasheets are controlled and under the responsibility of applications until handed over to Techpubs and it bees a PRELIMINARY datasheet - Moving from Advance to Prelim -- Apps EN 2 SP6253 9 VOUT2 BYP 3 10 Pin DFN 8 POR EW 4 7 DRV Director needs to sign off, and the Design Verification of First Silicon document needs SET 5 6 GND to be uploaded into Sharepoint. - Arial Font ONLY - These bullet items usually show up in the press release - Available in Lead Free, Ro HS pliant Packaging. This particular bullet item is standard. Pinouts are part of the original PDS from Design and verified in the bonding diagrams. They need to be submitted in a form that is editable by Adobe Illustrator. Note the font shuld be changed Remove the green BLURB about Lead Free Packaging, it is now considered a standard bullet item DESCRIPTION The description should be short enough to fit in between the Features Bullets and the Typical Application Circuit. Note that ARIAL Font is the only one used throughout, besides some specialty fonts such as Symbol or making diacritics more recognizable such as the capital i in Ilim. TYPICAL APPLICATION CIRCUIT C5 0.1u F DBST CVCC 10u F BAT54WS VIN BST R3 10K POWERGOOD NC ENABLE PWRGD SWN UVIN EN SP6133 GL GND CBST 0.1u F MT, Si4394DY 9.75 m Ohm, 30V SC5018-2R7M 2.7u H, 15A, 4.1m Ohm MB, Si4320DY 4 m Ohm,...