SP213E Datasheet | Sipex

® SP207E- SP213E +5V High Performance RS232 Transceivers s s s s s s s s s s Single +5V Supply Operation 0.1µF External Charge Pump Capacitors Typical 230kbps Transmission Rates Standard SOIC and SSOP Packages Lower Supply Current Than petition (typical 3m A) 1µA Shutdown Mode Wake Up Feature in Shutdown Mode Tri- State Receiver Outputs Meets All EIA-232 and ITU V.28 Specifications Improved ESD Specifications: +15k V Human Body Model +15k V IEC1000-4-2 Air Discharge +8k V IEC1000-4-2 Contact Discharge DESCRIPTION The SP200E Series are enhanced multi- channel RS-232 line transceivers with improved electrical performance. The SP200E family is pin-to-pin patible with our previous SP200 family as well as popular industry standards. As with the orignal SP200 family, all models in this Series feature low- power CMOS construction and Sipex- patented (5,306,954) on-board charge pump circuitry to generate the ±10V RS-232 voltage levels, using 0.1µF charge pump capacitors to save board space and reduce circuit cost. The SP211E and SP213E models feature a low- power shutdown mode, which reduces power supply drain to 1µA. Enhancements include lower power supply current at 3m A typical (no load) and superior ESD performance. The ESD tolerance has been improved on this family to over ±15k V for both Human Body Model and IEC1000-4-2 Air Discharge test methods. Number of RS232 Model Drivers Receivers SP207E 5 3 SP208E 4 4 SP211E 4 5 SP213E 4 5 Table 1. Model Selection Table No. of Receivers No. of External Active in Shutdown 0.1µF Capacitors 0 4 0 4 0 4 2 4 Shutdown Wake Up TTL Tri- State No No No No No No Yes No Yes Yes Yes Yes SP207EDS/09 SP207E Series High Performance Transceivers © Copyright 2000 Sipex...