SP26LV431 - High Speed / +3.3V Quad RS-422 Differential Line Driver

Product Overview

Sipex

Part number	SP26LV431
Manufacturer	Sipex
File Size	138.20 KB
Description	High Speed / +3.3V Quad RS-422 Differential Line Driver
Datasheet	SP26LV431 Datasheet
Additional preview pages of the SP26LV431 datasheet.

The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol.

Sipex's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state. Since the cabling can be as long as 4,000 feet, the RS-422 drivers of the SP26LV431 are equipp.

📁 Similar Datasheet

SP26LV431 - HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER (Exar)
SP26LV432 - HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER (Exar)
SP2638C - Constant current and constant voltage primary control power switch (SPMICRO)
SP2638D - constant current and constant voltage primary-side controlled power switch (SPMICRO)
SP2638F - Primary side control constant current / constant voltage AC / DC control circuit (Shenchuanghui Electronics)
SP2658E - Constant current and constant voltage primary control power switch (SPMICRO)
SP200F - (SP200F / SP250F) Rectifier Stacks (VMI)
SP200S - (SP200S / SP250S) Rectifier Stacks (VMI)

Other Datasheets by Sipex

Published: Jun 7, 2005 |