SP514 Datasheet | Sipex

DESCRIPTION The SP514 is a single chip devices that supports eight (8) physical serial interface standards for Wide Area Network connectivity. The product is fabricated using a low power Bi CMOS process technology, and incorporates a Sipex patented (5,306,954) charge pump allowing +5V only operation. The SP514 is 100% patible with the SP504 multi-protocol serial transceiver IC. All applications using the SP504 can also use the SP514. The SP514 has slightly improved AC performance for its V.35 and V.11 drivers and receivers. V.35 EIA-530 Rev. 3/05/04 SP514 Multi- Mode Serial Transceiver © Copyright 2004 Sipex Corporation ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. VCC +7V Input Voltages: Logic -0.3V to (VCC+0.5V) Drivers -0.3V to (VCC+0.5V) Receivers ±15.5V Output Voltages: Logic -0.3V to (VCC+0.5V) Drivers ±15V Receivers -0.3V to (VCC+0.5V) Storage Temperature -65˚C to +150˚C Power Dissipation 2000m W Package Derating: øJA 46 °C/W øJC 16 °C/W STORAGE CONSIDERATIONS Due to the relatively large package size of the 80-pin quad flat-pack, storage in a low humidity environment is preferred. Large high density plastic packages are moisture sensitive and should be stored in Dry Vapor Barrier Bags. Prior to usage, the parts should remain bagged and stored below...