SP8062 Datasheet | Sipex

FEATURES - - - - - - Dual wavelength 650 and 780nm Data channel bandwidth 130 MHz Eleven selectable gain settings covering 42d B range Group delay error less than 1ns up to 72MHz Slew rate up to 400V/us Small 16-pin OPLGA package Vs Gain 2 Gain 1 Gain 3 E F G H 1 2 3 4 5 6 7 8 SP8062 16-Pin OPLGA 16 15 14 13 12 11 10 9 Vcc RF+ RFC B D A GND APPLICATION - - - DVD-RAM with CD-RW capability DVD-RW with CD-RW capability Writable data storage optical devices GENERAL DESCRIPTION The SP8062 is a ten channel photo detector IC (PDIC) specially designed for high speed DVDRAM and DVD-RW applications and can operate at wavelength of 650 and 780 nm. The ten channels consist of four high speed channels (A, B, C, and D), four average speed channels (E, F, G, and H), and two channels with paraphase output (RF+ and RF-). The RF channels output is sum of A + B + C + D channels with identical weights. Low noise operation enables data recovery at very low signal levels. The SP8062 has three logic inputs for gain control, one of them operating as TTL patible (Gain 1), and two other operating as three state logic inputs (Gain 2 and Gain 3). The allowable logic states are used to select 10 gain factors and a sleep mode (see table 4). In sleep mode all channels are in tri-state condition. The SP8062 is manufactured with an advanced 10GHz BICMOS technology. Rev 1.7 (01-16-04): SP8062 - High Speed 10 Channel PDIC SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-978-667-8700. SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 1 of 4 ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Supply Voltage (Vcc)……………………..6.0V Input Voltage at any input….-0.6V to Vcc...