SPX1086 Datasheet | Sipex

FEATURES - Adjustable Output Down To 1.2V - Fixed Output Voltages 1.5, 2.5, 3.3, 5.0V - Output Current of 1.5A - Low Dropout Voltage 1.1V Typ. - Extremely Tight Load And Line Regulation - Current & Thermal Limiting - Standard 3-Terminal Low Cost TO-220, TO-263 & TO-252 - Similar To Industry Standard LT1086/LT1586 APPLICATIONS - Powering VGA & Sound Card - Power PC Supplies - SMPS Post-Regulator - High Efficiency “Green” puter Systems - High Efficiency Linear Power Supplies - Portable Instrumentation - Constant Current Regulators - Adjustable Power Supplies - Battery charger PRODUCT DESCRIPTION The SPX1086 is a low power 1.5A adjustable and fixed voltage regulators that are very easy to use. It requires only 2 external resistors to set the output voltage for adjustable version. The SPX1086 is designed for low voltage applications that offer lower dropout voltage and faster transient response. This device is an excellent choice for use in powering low voltage microprocessor that require a lower dropout, faster transient response to regulate from +2.5V to 3.8V supplies and as a post regulator for switching supplies applications. The SPX1086 features low dropout of a maximum 1.2 volts. The SPX1086 offers full protection against over-current faults, reversed input polarity, reversed load insertion, and positive and negative transient voltage. On-Chip trimming adjusts the reference voltage to 1%. The IQ of this device flows into load which increases efficiency. The SPX1086 are offered in a 3-pin TO-220, TO-263 & TO-252 packages patible with other 3 terminal regulators. For a 3A low dropout regulator refer to the SPX1587 data sheet. PIN CONNECTIONS TO-263-3 (T) TO-252 (R) TO-220-3 (U) 1 2 3 1 2 3 1 2 3 ADJ/GND VOUT VIN ADJ/GND VOUT VIN Front View ADJ/GND VOUT VIN Top View Front View Rev. 11/2/00 ABSOLUTE MAXIMUM RATINGS Lead Temp. (Soldering, 10 Seconds) 300°C Storage Temperature Range...