SPX2969 Datasheet | Sipexoration

FEATURES - 5V Fixed Output - 150m A current capability - 250m V Dropout - Programmable Reset Threshold - 250µA Quiescent Current - Over Temperature Protection - Reverse Polarity Protection - Integrated Pull Up Resistor on Logic Outputs - -40° to 125°C Operating Range - Available in 8 Pin and 14 Pin n SOIC or 20 Pin w SOIC packages. I 1 SI 2 RADJ 3 D 4 8 Q SPX2969 8 PIN NSOIC 7 SO 6 RO 5 GND Now Available in Lead Free Packaging APPLICATIONS - Automotive - Industrial - Wireless Base Station DESCRIPTION Sipex’s SPX2969 is a low dropout linear regulator with integrated PNP pass transistor. The part is designed for automotive environment, and thus can withstand up to 45V and 125°C temperature range. The output voltage is set at a fixed 5V, and the part is guaranteed to deliver at least 150m A. The SPX2969 provides multiple protection mechanisms, including overtemperature and over-current conditions. The part has a built-in reset circuit to monitor when the output voltage is below 4.65V. The reset voltage threshold can be programmed down to 3.5V using an external resistor voltage divider, while the reset timing can be programmed via an external capacitor. A built in parator pares the signal of the pin SI, normally fed by a voltage divider from the input voltage, with the reference and gives an early warning on the pin SO. Both the sense output and the reset output delay signals contain integrated 20k Ohm pull up resistors. The part is available in three package types: 8 Pin and 14 Pin n SOIC or 20 Pin w SOIC packages. TYPICAL APPLICATION CIRCUIT 12V + 1000µF RS1 RO I Q 5V RADJ1 + 22µF RADJ SO SI GND D 0.1µF RS2 RADJ2 RESET OUT Date: 8/4/04 SPX2969 150m A Low Dropout Voltage Regulator © Copyright 2004 Sipex Corporation ABSOLUTE MAXIMUM RATINGS Input Voltage -40V to 45V Input Current internally limited Sense Input Voltage...