Datasheet4U Logo Datasheet4U.com

SFT-0100 - Transimpedance Amplifier

General Description

Sirenza Microdevices’ SFT-0100 is a high performance heterojunction bipolar transistor transimpedance amplifier designed for 10/12.5 Gb/s SONET/SDH applications.

Key Features

  • Cfilter Transimpedance Amplifier Rx TIA Photo-detector DCDR.
  • AMP1 OUTN OUTP.
  • Low noise InGaP HBT technology Differential transimpedance ~ 2200 Ω +5.0V power supply High sensitivity < 10pA ⁄ Hz Adjustable dynamic range Low duty-cycle distortion Differential Outputs Photo current monitor Patented DCDR circuit Backside vias eliminate the need for ground wirebonds CDCDR.
  • Patented Cext.

📥 Download Datasheet

Datasheet Details

Part number SFT-0100
Manufacturer Sirenza Microdevices
File Size 164.57 KB
Description Transimpedance Amplifier
Datasheet download datasheet SFT-0100 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SFT1 SUPER FAST RECTIFIER DIODES EIC discrete Semiconductors
SFT1 (SFT1 - SFT9) SUPER FAST RECTIFIER DIODES SynSemi
SFT10.7 CERAMIC FILTER Murata
SFT10.7MA5 FILTERS Murata Electronics
SFT10.7MA5-Z CERAMIC FILTER Murata

Other Datasheets by Sirenza Microdevices

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Data Sheet Product Description Sirenza Microdevices’ SFT-0100 is a high performance heterojunction bipolar transistor transimpedance amplifier designed for 10/12.5 Gb/s SONET/SDH applications. The SFT-0100 uses high FT indium gallium phosphide device technology that delivers high transimpedance, large dynamic range, and a typical bandwidth greater than 10.5GHz. Performance is enhanced through the use of a patented circuit topology that reduces duty cycle distortion under high photocurrent conditions and allows high transimpedance with low DC power to be realized. The SFT-0100 is supplied in bare die form and includes a current monitor feature that can be used for fiber alignment or loss of signal (LOS) detection.