Datasheet4U Logo Datasheet4U.com

AAT4295 - Single/Dual RGB Controller

General Description

The AAT4295/97 SmartSwitch is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family.

The AAT4295/97 is comprised of three/six low-side N-channel MOSFET switches that gate an applied load to ground.

Key Features

  • The state of each output channel is controlled with a single GPIO line via the EN/SET pin using Skyworks' Simple Serial Control (S2Cwire™) interface. After a short set of data pulses is sent to the EN/SET input and the line is pulled to logic high, the device is enabled with the desired switch configuration. In the enabled state, the AAT4295/97 typically consumes less than 3μA of quie.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AAT4295 (AAT4295 / AAT4297) Single/Dual RGB Controller AAT
AAT4290 (AAT4290 / AAT4291) I/O Expander Load Switches AAT
AAT4291 (AAT4290 / AAT4291) I/O Expander Load Switches AAT
AAT4296 (AAT4296 / AAT4298) Five/Six Channel Push/Pull I/O Expander AAT
AAT4297 (AAT4295 / AAT4297) Single/Dual RGB Controller AAT

Other Datasheets by Skyworks Solutions

Part Number Description
AAT4290 I/O Expander Load Switches
AAT4291 I/O Expander Load Switches
AAT4296 Five/Six-Channel Push/Pull I/O Expander
AAT4297 Single/Dual RGB Controller
AAT4298 Five/Six-Channel Push/Pull I/O Expander

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
General Description The AAT4295/97 SmartSwitch is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family. The AAT4295/97 is comprised of three/six low-side N-channel MOSFET switches that gate an applied load to ground. This device is intended for controlling RGB fashion lighting in portable products; it can also be used for a combination of general purposes where a load requires a low-side switch connection to ground. The AAT4295/97 simplifies design and layout limitations by eliminating the need for multiple GPIO control lines and discrete MOSFETs to control product features. The state of each output channel is controlled with a single GPIO line via the EN/SET pin using Skyworks' Simple Serial Control (S2Cwire™) interface.