Datasheet4U Logo Datasheet4U.com

AAT4297 - Single/Dual RGB Controller

Download the AAT4297 datasheet PDF. This datasheet also covers the AAT4295 variant, as both devices belong to the same single/dual rgb controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The AAT4295/97 SmartSwitch is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family.

The AAT4295/97 is comprised of three/six low-side N-channel MOSFET switches that gate an applied load to ground.

Key Features

  • The state of each output channel is controlled with a single GPIO line via the EN/SET pin using Skyworks' Simple Serial Control (S2Cwire™) interface. After a short set of data pulses is sent to the EN/SET input and the line is pulled to logic high, the device is enabled with the desired switch configuration. In the enabled state, the AAT4295/97 typically consumes less than 3μA of quie.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AAT4295-SkyworksSolutions.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
General Description The AAT4295/97 SmartSwitch is a member of Skyworks' Application Specific Power MOSFET (ASPM™) product family. The AAT4295/97 is comprised of three/six low-side N-channel MOSFET switches that gate an applied load to ground. This device is intended for controlling RGB fashion lighting in portable products; it can also be used for a combination of general purposes where a load requires a low-side switch connection to ground. The AAT4295/97 simplifies design and layout limitations by eliminating the need for multiple GPIO control lines and discrete MOSFETs to control product features. The state of each output channel is controlled with a single GPIO line via the EN/SET pin using Skyworks' Simple Serial Control (S2Cwire™) interface.