Datasheet4U Logo Datasheet4U.com

SKY65601-477LF - 1.575 GHz GPS/GNSS Low-Noise Amplifier

Description

The SKY65601-477LF is a Microwave Monolithic Integrated Circuit (MMIC) front-end Low Noise Amplifier (LNA) designed for Global Positioning System/Global Navigation Satellite System (GPS/GNSS) receiver applications.

Features

  • All matching components integrated (no inductors required).
  • Small signal gain: 16.8 dB typical.
  • IIP3: +4 dBm.
  • Low Noise Figure: 0.8 dB typical.
  • IP1dB: up to.
  • 4.8 dBm.
  • Low current consumption.
  • Input/output impedance internally matched to 50 Ω.
  • Single DC supply: 1.8 to 3.6 V.
  • Minimal number of external components required.
  • Small, DFN (6-pin, 2.0 x 1.3 mm) package (MSL1, 260 °C per JEDEC J-STD-020) Sk.

📥 Download Datasheet

Datasheet preview – SKY65601-477LF

Datasheet Details

Part number SKY65601-477LF
Manufacturer Skyworks Solutions
File Size 882.36 KB
Description 1.575 GHz GPS/GNSS Low-Noise Amplifier
Datasheet download datasheet SKY65601-477LF Datasheet
Additional preview pages of the SKY65601-477LF datasheet.

📁 Similar Datasheet

  • SKY65249-11 - Front-End Module (Skyworks)
  • SKY65313-21 - 900MHz Transmit/Receive Front-End Module (Skyworks)
  • SKY65362-11 - High-Power RF Front-End Module (Skyworks)
  • SKY65366-21 - 400 MHz Transmit/Receive Front-End Module (Skyworks)
  • SKY65374-11 - Active Bias Low-Noise Variable Gain Amplifier (Skyworks)
  • SKY65378-11 - RF Front-End Module (Skyworks)
  • SKY65933-11 - GNSS Low-Noise Amplifier Front-End Module (Skyworks)
  • SKY65943-11 - GNSS Low-Noise Amplifier Front-End Module (Skyworks)
  • SKY66001-11 - Linear Power Amplifier (Skyworks)
  • SKY66100-11 - Transmit/Receive Front-End Module (Skyworks)
Other Datasheets by Skyworks Solutions

Full PDF Text Transcription

Click to expand full text
PRELIMINARY DATA SHEET SKY65601-477LF: 1.575 GHz GPS/GNSS Low-Noise Amplifier • GPS/GNSS radio receivers • Global Navigation Satellite Systems (GLONASS) • Smart phones • Tablet/laptop PCs • Personal navigation devices VCC Output Match RF_IN Input Match VEN Applications Enable LNA RF_OUT Features • All matching components integrated (no inductors required) • Small signal gain: 16.8 dB typical • IIP3: +4 dBm • Low Noise Figure: 0.8 dB typical • IP1dB: up to –4.8 dBm • Low current consumption • Input/output impedance internally matched to 50 Ω • Single DC supply: 1.8 to 3.6 V • Minimal number of external components required • Small, DFN (6-pin, 2.0 x 1.
Published: |