• Part: SKY77910-11
  • Description: Tx-Rx FEM
  • Manufacturer: Skyworks Solutions
  • Size: 1.42 MB
Download SKY77910-11 Datasheet PDF
Skyworks Solutions
SKY77910-11
SKY77910-11 is Tx-Rx FEM manufactured by Skyworks Solutions.
Features - Small, low profile package - 5.5 mm x 5.3 mm x 0.8 mm - 38-pad configuration - Fully programmable MIPI® RFFE control - Eight low insertion loss / high linearity TRx switch ports - Integrated noise suppression notch filter for Wi Fi coexistence - Built-in IEC-pliant antenna ESD protection - Integrated broadband directional coupler - High Efficiency (inclusive of coupler) - 40% GSM850 36% DCS1800 - 40% GSM900 36% PCS1900 - Wide GMSK input power range: - 1 d Bm to 6 d Bm - Tx-VCO-to-antenna and antenna-to-Rx-SAW filter RF interface - Tx harmonics below - 40 d Bm - Current limiting and over-voltage protection for ruggedness and extended battery life - Input/Output ports internally matched to 50 Ω load - High impedance control inputs: 20 µA, maximum - Power control circuitry built-in for improved TRP variation Description The design of the SKY77910-11 Transmit / Receive Front End Module (FEM) offers a plete transmit VCO-to-Antenna and Antenna-toreceive SAW filter solution for advanced cellular handsets prising quad-band GSM, and linear 2.5G operation. Developed in a very low profile (0.8 mm) and pact form factor, the FEM supports Class 12 General Packet Radio Service (GPRS), EDGE multi-slot operation, and TD-SCDMA and TDD LTE linear transmission. Eight transmit / receive (TRx) ports and an integrated directional coupler enables broadband 3G/4G RF switch-through. The module consists of a CMOS Power Amplifier (PA) Controller, a low band (LB) PA block supporting GSM850/900 bands, a high band (HB) PA block supporting DCS1800/PCS1900, TD-SCDMA bands 34/39, and TDD LTE band 39, input and output ports internally matched to 50 ohm impedance loads, Tx harmonic filtering, RF switching, and a directional coupler at the antenna output. The custom low-current PA controller includes the Mobile Industry Processor Interface (MIPI) and decoder circuitry to control the RF switch. Internal matching of all RF ports to a 50 ohm load reduces the number of external ponents on the phone...