SKY66408-11 Datasheet | Skyworks Solutions

Features - Fully programmable Pout via I2C interface - Integrated PA with up to +21 d Bm output power - Integrated LNA (2.5 d B noise figure typical) and bypass path - Integrated antenna diversity switching for all modes - Single-ended transmit/receive interface - Supply range: 1.7 V to 3.6 V - Sleep mode current: < 3 μA typical - No external bias resistor is required - Small MCM (24-pin, 3.0 mm x 3.0 mm x 0.6 mm) package, Ni Pd Au-plated (MSL3, 260 °C per JEDEC-J-STD-020) Figure 1. SKY66408-11 Block Diagram Description The SKY66408-11 is a high-performance, fully integrated RF front-end module (FEM) designed for Zigbee technology, Thread, and devices with a port suitable for Bluetooth® (including low energy) applications. The SKY66408-11 is designed for ease of use and maximum flexibility. The device provides an integrated inter-stage matching and harmonic filter, and digital controls patible with 1.2 V to 3.6 V CMOS levels. The RF blocks operate over a wide supply voltage range from 1.7 V to 3.6 V that allows the SKY66408-11 to be used in battery powered applications over a wide spectrum of the battery discharge curve. A functional block diagram is shown in Figure 1. The SKY66408-11 is provided in a small, 24-pin, 3.0 mm x 3.0 mm Multi-Chip Module (MCM) package. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. - Phone [949] 231-3000 - sales@skyworksinc. - .skyworksinc. 205918D - Skyworks Proprietary Information - Products and Product Information are Subject to Change Without Notice - December 15, 2022 PRODUCT SUMMARY - SKY66408-11: 2.4 GHz FRONT END MODULE Ordering Information Part Number SKY66408-11 Product Description SKY66408-11: 2.4 GHz Front End Module Evaluation Board Part Number SKY66408-11EK1 Copyright © 2020-2022 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions,...