SKY73208-11 Datasheet | Skyworks Solutions

Features - RF frequency range: 350 to 5000 MHz - IF frequency range: 50 to 500 MHz - Conversion gain: 6 d B - IIP3: +26 d Bm; OIP3: +32 d Bm - Noise figure: 14 d B - Integrated RF balun - Integer-N frequency synthesizer - Low phase-noise VCO - Low RF output parison spurs - Programmable 18-bit N-counter and 11-bit R-counter - Wide range of reference frequencies - Programmable charge pump currents - Flexible configuration that allows connection to an external VCO or PLL - Digital lock detector - Power supply for mixer: 5 V; power supply for synthesizer: 3.3 V - Small, low-cost MCM (36-pin, 6 x 6 mm) SMT package (MSL3, 260 C per JEDEC J-STD-020) Skyworks Green™ products are pliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. Description The Skyworks SKY73208-11 is a fully integrated wideband receive downconverter that includes a high-linearity mixer and a plete voltage-controlled oscillator (VCO), synthesizer, and local oscillator (LO) chain. A low-loss RF balun has also been included to reduce design plications and to lower system cost. The SKY73208-11 features a third order input intercept point (IIP3) of +26 d Bm and a noise figure (NF) of 14 d B, which make the device an ideal solution for high dynamic range systems such as 2G/3G base station receivers. The SKY73208-11 also includes a fully integrated wideband VCO/Integer-N frequency synthesizer. The device includes four differential VCOs that cover the output frequency range from 2.8 GHz to 6.0 GHz. By applying internal VCO division, the output LO frequency can be set to the desired value while minimizing the phase noise. The direct, non-divided internal VCO frequency can also be monitored at the bidirectional VCO pins. The flexible SKY73208-11 LO configuration allows the loop to be locked by an external VCO or external phase locked loop (PLL), or the device can use the divider chain only. The SKY73208-11 is...