Datasheet4U Logo Datasheet4U.com

Si3474 - Ethernet Port PoE PSE Controllers

General Description

br>

.

.

.

.

.

.

.

.

.

Key Features

  • a fully-programmable architecture that enables powered device (PD) disconnect using dc-sense algorithms, a robust multipoint detection algorithm, software configurable per-port current and voltage monitoring, and programmable current limits to support the IEEE 802.3af, 802.3at, and 802.3bt standards. Intelligent protection circuitry includes input undervoltage detection, output current limit, and short-circuit protection. The Si3474 operates autonomously or by host processor control through a tw.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
Si3474 Up to four 802.3bt or eight 802.3at Ethernet Port PoE PSE Controller Silicon Laboratories
SI3474DV N-Channel 100-V (D-S) MOSFET Vishay
SI3471CDV P-Channel MOSFET Vishay Siliconix
SI3473CDV P-Channel MOSFET Vishay Siliconix
Si3473DDV P-Channel 12 V (D-S) MOSFET Vishay

Other Datasheets by Skyworks Solutions

Part Number Description
Si3471 Autonomous Single Ethernet Port IEEE 802.3bt PoE PSE
Si3472 Octal or Quad 2-pair 802.3bt Ethernet Port PoE PSE Controller
Si3473 Octal or Quad 2-pair 802.3bt Ethernet Port PoE PSE Controller
Si3404 1-Compliant POE PD Interface and High-Efficiency Switching Regulator
Si34061 POE+ PD Interface & Switching Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Si3474 Data Sheet Up to four 802.3bt or eight 802.3at Ethernet Port PoE PSE Controllers The Si3474 is a fully programmable, 50 to 57 V power management controller for IEEE 802.3af, 802.3at, and 802.3bt compliant Power Sourcing Equipment (PSE). Designed for use in PSE endpoints (switches), the Si3474 integrates eight independent ports, each with the IEEE-required powered device (PD) detection and classification functionality. When used in 802.3af/802.3at (two-pair power) mode each PSE port supports one Ethernet connection, for a total of eight PoE Ethernet connections. 802.3bt operation (four-pair power) uses two PSE ports per Ethernet connection, for a total of four PoE Ethernet connections.