Si82D29 Datasheet | Skyworks Solutions

feature -rich and easy-to-use solution for various power applications. The Si82Dx includes devices with single or dual control inputs with independent or High-Side/Low-Side outputs.  These drivers can operate with a 3 to 20 V input supply and a maximum gate driver supply voltage of 30 V.  The inputs are CMOS, which provides robust  noise margin. The Si82Dx is ideal for driving power silicon MOSFETs and IGBTs used in various switched power and motor control applications. These drivers utilize Skyworks' proprietary silicon isolation technology, supporting up to 6 k VRMS for one minute isolation voltage.  This technology enables high CMTI (200 k V/μs), lower propagation delays and skew, little variation with temperature and age, and tight part-to-part matching. The Si82Dx family offers longer service life and higher reliability than optocoupled gate drivers. The output stage operates as a voltage source with robust current output across operating conditions.  The output stage features voltage mode drive technology using a familiar current-limiting resistor, allowing power designers to optimize for switching speed, emissions control, and overshoot limitation. The driver family also offers features , such as Undervoltage Lockout (UVLO), dead-time programmability, and defined output states in all operating conditions. Automotive grade is available. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Applications - Si MOSFET and IGBT gate drive - AC/DC converters - DC/DC converters - Class D amplifiers Safety Regulator Approvals (Pending) - UL 1577 recognized - Up to 6000 VRMS for one minute - CSA certification conformity - 62368-1 (reinforced insulation) - 60601-1 (2 MOPP) - VDE certification conformity - 60747-17 (reinforced insulation) - CQC certification approval - GB4943.1 (reinforced insulation) Key Features - Wide input range of 3 to...