Si85836 Datasheet | Skyworks Solutions

Features - pliance to TIA/EIA-485-A (RS-485), patible with EN 50170 (Profi Bus) - Industry standard footprint and logic operation - Signaling rates of up to 10 Mbps - HBM 15 k V bus pin ESD ratings - mon mode voltage supported for operation:  - 7 V to +12 V - Bus fault protection: ±30 V - Thermal shutdown protection - VDD1: 3.0 V to 5.5 V - VDD2: 3.3 V or 5.0 V options - 17 ns typical driver propagation delay - 5 k VRMS isolation UL 1577 - CMTI of 100 k V/µs (min) - Unit loading: Up to 256 transceivers supported - TA: - 40 to +125 °C - JEDEC-qualified - WB SOIC-16 Ro HS-pliant package Description The Si858x products are devices that bine robust, fully pliant RS-485 transceivers with signal  isolation. These devices are ideal for industrial  automation applications that require isolated  interfaces for Field Bus systems that form a  munication network for connecting sensors,  actuators, and controllers. These devices are ideal for isolating nodes on Field Buses based on the RS-485 standard, such as  Profi Bus or Mod Bus. These transmission lines can be  susceptible to electrical noise transients especially in harsh environments such as a factory floor, or in  sensitive environments such as process control or data acquisition. Isolation provides a means of protection from such transients and noise that could corrupt  signal integrity. These isolated transceivers can operate with a 3.3 V or 5.0 V nominal power supply and have robust bus fault tolerance up-to ±30 V for protecting against harmful transients in noisy environment where such systems are often utilized. The bus pins are also protected up to 15 k V HBM ESD. Product options are available for half duplex and full duplex mode in industry standard footprints and incorporate slew rate controlled drivers with 1 Mbps data rate capability for reducing the EMI profile or options for high data rate up to 10 Mbps with no slew rate control implemented. These  products also offer safety and protection features , such as...