SW75 Datasheet | Smart Vision Lights

SW75 Series WASHDOWN Brick Light product introduction The SW75 Series Features a stainless steel IP69K rated enclosure with sealed bolts and waterproof connector for applications in wash down and corrosive environments. The SW75 es equipped with NPN and PNP signal input for strobe and offers a 0-10 VDC analog intensity control as well as a manual intensity control potentiometer. Six high current LED’s are mounted to an aluminum back plate of which is mounted to the stainless steel enclosure for extra heat dissipation ability. product Features - - - - - - - - IP69K Standards Stainless Steel 316 Housing Meets FDA pliancy PNP and NPN Strobe input Continuous operation or Strobe mode Dimmable via built in potentiometer Analog intensity 0-10VDC signal Six, 1mm² Die High Current LEDs product specifications Electrical Input Current Wattage Strobe Input PNP Line NPN Line Continuous Mode Potentiometer Analog Intensity Connection Ambient Temp. Lifespan IP Rating pliances Weight IEC 62471 Rating 24 VDC +/- 5% Max. 400m A Max. 9.6W PNP - +3VDC or greater to activate. │ NPN - GND (<1VDC) to activate 30.4m A @ 24 VDC 3.7m A @ 3VDC │6.2m A @ 5VDC │ 12.6m A @ 10VDC │ 22m A @ mon (0VDC) Light will be in continuous mode by leaving signal on strobe input active Intensity control of 10% to 100% Clockwise increases intensity The output is adjustable from 10 -100% of brightness by a 0 -10 VDC signal 5 pin M12 connector -20º - 50º C (-4º - 122º F) 100,000 hrs IP69K CE and Ro HS ~710g See page 4 Smart Vision Lights - 2359 Holton Rd. - Muskegon, MI 49445 - Phone 231.722.1199 .smartvisionlights. Free Datasheet http://.. product number key - XXX - X- ─» Part Number Key Product Family: Brick Light SW75 Color: 470, 505, 530, 625, 850, 940 & WHI (White) Lenses: W-Wide L-Line - Lights e standard with Narrow lenses CE and Ro HS pliant warnings ! Attention Please note that the power requirements are up to 400m A at 24VDC. Failure to supply light...