Datasheet4U Logo Datasheet4U.com

S113 - Relay

General Description

The S113 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay.

The circuit is composed of one input IR LED which activates an optically coupled IC on the output that controls the firing angle of two back-to-back SCRs.

Key Features

  • Zero-Volt Cross Switching.
  • High Blocking Voltage (800V MIN).
  • High Transient Immunity.
  • 0.8A Maximum Continuous Current.
  • Low Input Control Current.
  • Long Life / High Reliability.
  • RoHS / Pb-Free / REACH Compliant Agency Approvals UL/C-UL: VDE: File # E90096 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defi.

📥 Download Datasheet

Datasheet Details

Part number S113
Manufacturer Solid State Optronic
File Size 330.00 KB
Description Relay
Datasheet download datasheet S113 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S1133 Si photodiode Hamamatsu Corporation
S1133-01 Si photodiode Hamamatsu Corporation
S1133-14 Si photodiode Hamamatsu Corporation
S11355-03 Photo IC HAMAMATSU
S11 THIN FILM SPST SWITCH Tyco Electronics

Other Datasheets by Solid State Optronic

Part Number Description
S110 Relay
S110-X AC Solid State Relay

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S113 Zero Cross 800V / 0.8A AC Solid State Relay Description The S113 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED which activates an optically coupled IC on the output that controls the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zerovolt switching window not exceeding 5V. The S113 provides high peak load voltage (800V+) and high input-tooutput isolation voltage (up to 5kVRMS). The S113 comes in a compact 8 pin DIP package, making it ideal for high-density board applications.