SM8027 Datasheet | Solid State Optronic

Description The SM8027 is posed of two distinct MOSFET drivers in a single package. Each driver circuit consists of an input drive LED optically coupled to a photodiode array output designed to drive highly capacitive loads, including the gate of a power MOSFET. The active discharge circuit of the PDAs assures quick discharge of MOSFETs, providing fast turn-off times. This device can be used as two separate drivers, or can be wired as a single enhanced driver with either greater photo current or photo voltage output. The SM8027 es standard in a pact 8 pin DIP package making it ideal for high-density board applications. Applications - Isolated means to drive discrete power MOSFETs - Lighting Controls - Process Control Modules - Solid State Relays - Solenoid Controls Schematic Diagram Features - pact 8 pin DIP/SMD package - Built in active discharge circuit for fast turn-off - Fast Turn-On - Optional Parallel or Serial Output Connections - 11V Gate Drive Voltage - High Input-to-Output Isolation (up to 5k VRMS) - Long Life / High Reliability - Ro HS / Pb-Free / REACH pliant Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Storage Temperature …………………………..-55 to +125°C Operating Temperature …..….….……...………-40 to +85°C Continuous Input Current ………..……………………..50m A Transient Input Current ………..……….……………..400m A Reverse Input Control Voltage …………..…………………5V Input Power Dissipation ………..………………………40m W Output Power Dissipation ……..……………………..400m W Solder Temperature - Wave (10sec)……………….….260°C Solder Temperature - IR Reflow (10sec)….…………..260°C © 2013 Solid State Optronics - San José, CA...