TD3062 Datasheet | Solid State Optronic

Description The TD3062 consists of a single input LED optically coupled to a zero-volt crossing triac driver. The TD3062 provides high input-to-output isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment powered from 110VAC to 240VAC lines. The TD3062 es standard in a miniature 6 pin DIP package making it ideal for high-density board applications. Applications - Home Appliances - Motor / Drive Controls - Solid State Relays - Solenoid / Valve Control - Temperature Control Schematic Diagram Features - Zero-Volt Switching - 600V Blocking Voltage - Trigger Current (10m A MAX) - High Isolation Voltage (5000VRMS) - High d V/dt (1k V/S MIN, 2k V/S TYP) - Long Life / High Reliability - Ro HS / Pb-Free / REACH pliant Agency Approvals UL/C-UL: VDE: File # E201932 File # 40035191 (EN 60747-5-2) Absolute Maximum Ratings The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to absolute Maximum Ratings may cause permanent damage to the device and may adversely affect reliability. Storage Temperature …………………………..-55 to +125°C Operating Temperature …….………...………-40 to +100°C Continuous Input Current ………………………………..50m A Transient Input Current ………………….……………..400m A Reverse Input Control Voltage …………..…………………5V Input Power Dissipation…………………………………40m W Output Power Dissipation ……………………………..330m W Solder Temperature - Wave (10sec)……………….….260°C Solder Temperature - IR Reflow (10sec)….…………..260°C Ordering Information Part Number Description TD3062 TD3062-H TD3062-S TD3062-STR 6 pin DIP, (60/Tube) 0.40” (10.16mm) Lead Spacing (VDE0884) 6 pin SMD, (60/Tube) 6 pin SMD, Tape and Reel (1000/Reel) NOTE: Suffixes listed above are not included in marking on device for part number identification © 2013 Solid State Optronics - San José, CA .ssousa. -...