Solid State Optronics S111
The S111 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V.| Part No. | S111 |
|---|---|
| Datasheet | S111 Download |
| Manufacturer |  Solid State Optronics |
| Description | Solid State Relay |
| Buy | Stock & Price |
DESCRIPTION
FEATURES
● Zero-Volt Cross Switching● High transient immunity
● 600V blocking voltage
● 0.8A maximum continuous current
● Low input control current
● High input-to-output isolation
● Solid state reliability OPTIONS/SUFFIXES*
● -H High Output Isolation
● -S Surface Mount Option
● -TR Tape and Reel Option NOTE: Suffixes listed above are not included in marking on device for part number identification. SCHEMATIC DIAGRAM
APPLICATIONS
● Valve control● Solenoids
● Home appliances
● Metering equipment
● Heating elements
● Gas pump control circuitry
ABSOLUTE MAXIMUM RATINGS
* PARAMETER UNIT MIN TYP MAX Storage Temperature °C -55 125 Operating Temperature °C -40 85 Continuous Input Current mA 40 Transient Input Current mA 400 Reverse Input Control Voltage Output Power Dissipation V mW 6 800 *The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document.
