TD3052 - Random Switching Triac Driver

Solid State Optronics

General Description

The TD3052 consists of an AlGaAs LED optically coupled to a Random Phase triac driver chip.

The TD3052 provides high input-tooutput isolation and is designed to drive high-powered triacs.

Typical uses include interfacing logic level control signals to equipment powered from 110Vac and 220Vac lines.

Key Features

Random phase switching.
600V blocking voltage.
High input-to-output isolation (5kV MIN).
10mA turn-on (trigger) current.
High reliability.

📥 Download Datasheet

TD3052 random switching triac driver by Solid State Optronics - Datasheet Preview

Datasheet Details

Part number	TD3052
Manufacturer	Solid State Optronics
File Size	521.77 KB
Description	Random Switching Triac Driver
Datasheet	TD3052 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
TD3053	Triac Driver	Solid State Optronic
TD300	15V TRIPLE IGBT/MOS DRIVER	ST Microelectronics
TD300A	Current Transducers	Topstek
TD300A-SP1	Current Transducers	Topstek
TD301D485H	SINGLE HIGH SPEED RS485 ISOLATION TRANSCEIVER MODULE	MORNSUN

Other Datasheets by Solid State Optronics

Part Number	Description
TD3043	Zero-Volt Switching Triac Driver
TD3082	Zero-Volt Switching Triac Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TD3052 Random Switching Triac Driver DESCRIPTION The TD3052 consists of an AlGaAs LED optically coupled to a Random Phase triac driver chip. The TD3052 provides high input-tooutput isolation and is designed to drive high-powered triacs. Typical uses include interfacing logic level control signals to equipment powered from 110Vac and 220Vac lines. FEATURES • Random phase switching • 600V blocking voltage • High input-to-output isolation (5kV MIN) • 10mA turn-on (trigger) current • High reliability OPTIONS/SUFFIXES* • -H 0.4" Lead Spacing (see mechanical dimensions) • -S Surface Mount Leadform Option • -TR Tape and Reel Option • -V Signifies VDE approval NOTE: Suffixes listed above are not included in marking on device for part number identification.