Datasheet4U Logo Datasheet4U.com

CXA1511M - Preamplifier for Remote Control Signal Reception

General Description

The CXA1511L/M is a bipolar IC used for preamplifiers that receive signals in infrared remote control systems.

These ICs consist of a first-stage amplifier, limiter amplifier, band-pass filter, band elimination filter, signal waveform detection circuit and waveform shaping circuit.

Key Features

  • Low power consumption (VCC = 5V, 9mW typ. ).
  • Low supply voltage (VCC = 5V).
  • Filters (center frequency can be varied through external resistor: fo = 30kHz to 60kHz, 40kHz typ. ).
  • Elimination of inductors prevents magnetic field inductance interference.
  • Optical reception diode can be coupled directly.
  • Collector output (pull-up resistor, TTL and CMOS can be connected directly).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA1510 LED CREE
CXA1512 LED Cree
CXA1507 LED Cree
CXA1520 LED CREE
CXA1522M Stereo Power Amplifier Sony

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA1511L Preamplifier for Remote Control Signal Reception
CXA1512M MOTOR SENSOR AMPLIFIER FOR 8 mm CAMCORDER
CXA1512N MOTOR SENSOR AMPLIFIER FOR 8 mm CAMCORDER
CXA1518Q EIAJ Sound Multiplexing Decoder
CXA1518S EIAJ Sound Multiplexing Decoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXA1511L/M Preamplifier for Remote Control Signal Reception Description The CXA1511L/M is a bipolar IC used for preamplifiers that receive signals in infrared remote control systems. These ICs consist of a first-stage amplifier, limiter amplifier, band-pass filter, band elimination filter, signal waveform detection circuit and waveform shaping circuit. Features • Low power consumption (VCC = 5V, 9mW typ.) • Low supply voltage (VCC = 5V) • Filters (center frequency can be varied through external resistor: fo = 30kHz to 60kHz, 40kHz typ.) • Elimination of inductors prevents magnetic field inductance interference. • Optical reception diode can be coupled directly.