Datasheet4U Logo Datasheet4U.com

CXA1702AR - 4-channel REC/PB Amplifier for 8 mm VCR

General Description

The CXA1702AR is a bipolar IC designed as recording/playback amplifiers for Hi8-compatible VCRs.

Key Features

  • Recording/playback system.
  • Hi8-compatible wideband recording/playback amplifier.
  • Enables electric variable resistor (EVR) control. 64 pin LQFP (Plastic).
  • Recording system.
  • Feedback damping provided in the recording amplifier and its EVR control function facilitate printed circuit board design.
  • Five-input (Y, chroma, AFM, ATF, PCM) mix amplifier and EVR control function for Y/low-band recording level.
  • Ramp circuit for the record.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA1739S RGB Interface ETC
CXA1782BQ RF Signal Processing Servo Amplifier Sony
CXA1782BR RF Signal Processing Servo Amplifier Sony
CXA10-48D05J DC-DC / Low Power Isolated Industrial Emerson
CXA10-48D05Y DC-DC / Low Power Isolated Industrial Emerson

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA1700AQ Luminance and Color Signal Processing for 8mm VCR
CXA1700AR Luminance and Color Signal Processing for 8mm VCR
CXA1704R 2-channel REC/PB Amplifier for 8mm VCR
CXA1709P PRE-DRIVER FOR ULTRA-HIGH RESOLUTION COMPUTER DISPLAY
CXA1720Q Read/Write Amplifier (with Built-in Filters) for FDDs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXA1702AR 4-channel REC/PB Amplifier for 8 mm VCR Description The CXA1702AR is a bipolar IC designed as recording/playback amplifiers for Hi8-compatible VCRs. Features Recording/playback system • Hi8-compatible wideband recording/playback amplifier. • Enables electric variable resistor (EVR) control. 64 pin LQFP (Plastic) • • Recording system • Feedback damping provided in the recording amplifier and its EVR control function facilitate printed circuit board design. • Five-input (Y, chroma, AFM, ATF, PCM) mix amplifier and EVR control function for Y/low-band recording level. • Ramp circuit for the recording amplifier output bias current.