Datasheet4U Logo Datasheet4U.com

CXA3068N - L-band Down Converter for Satellite Tuner

Description

The CXA3068N is a monolithic IC to down-convert the L-band (930 to 2150 MHz) signal for the satellite broadcasting receiver.

It has a double-balanced mixer, local oscillator circuit and IF amplifier on chip.

Features

  • Balance-type Colpitts oscillator circuit provides a stable and wide range oscillation. Oscillation frequency : 2.63 GHz.
  • Small leak of the local oscillation signal due to the double-balanced mixer.
  • Oscillation frequency drift is small, caused by the change of impedance at the pre-stage of RF input.
  • Local oscillator output circuit for PLL. Single 5 V power supply operation. Low current consumption. ICC=53 mA (typ. ) 16-pin SSOP p.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA3070 LED CREE
CXA3314ER 6GHz PLL Sony
CXA3355AER GPS Down Converter IC Sony
CXA3355ER GPS Down Converter IC Sony
CXA3355TQ GPS Down Converter IC Sony

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA3067M Wide Band FSK Receiver
CXA3001N RX Gain Control Amplifier
CXA3002N RX Gain Control Amplifier
CXA3003R Baseband analog processing IC for dual-mode CDMA/FM cellular phone
CXA3008N-1 L-BAND DOWN CONVERTER IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXA3068N L-band Down Converter for Satellite Tuner Description The CXA3068N is a monolithic IC to down-convert the L-band (930 to 2150 MHz) signal for the satellite broadcasting receiver. It has a double-balanced mixer, local oscillator circuit and IF amplifier on chip. Features • Balance-type Colpitts oscillator circuit provides a stable and wide range oscillation. Oscillation frequency : 2.63 GHz • Small leak of the local oscillation signal due to the double-balanced mixer. • Oscillation frequency drift is small, caused by the change of impedance at the pre-stage of RF input. • • • • Local oscillator output circuit for PLL. Single 5 V power supply operation. Low current consumption. ICC=53 mA (typ.) 16-pin SSOP package contributes to reduction in set size.
Published: |