CXB1586AR Datasheet | Sony Semiconductor Solutions

Description The CXB1586AR is a transceiver IC with a built-in PLL for Fibre Channel. For a receiver 1.0625 Gbaud serial data is received and output it as the 10-bit parallel data; for transmitter 1.0625 Gbaud 10bit parallel data is output as the serial data. Features - Transmitter and receiver in a single chip - ANSI X3T11 Fibre Channel patible (FC_0) at 1.0625 Gbaud - Conforms to 10-bit interface specification - TTL / ECL patible - Single +3.3 V power supply - - - - - PLL for clock generation and clock / data recovery Byte sync detector (positive character of ma) Local loop back circuit Low power consumption (0.8 W typ.) 64-pin plastic LQFP package (10 mm × 10 mm) 64 pin LQFP (Plastic) Absolute Maximum Ratings (Ta=25 °C) - Supply voltage VCC - 0.3 to 4 V - Operating temperature Topr - 55 to +70 °C - Storage temperature Tstg - 65 to +150 °C - Allowable power dissipation PD to 1109 m W Operating Conditions Supply voltage 3.14 to 3.46 Applications 1.0625 Gbaud Fibre channel Structure Bipolar silicon monolithic IC Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits. - 1- E97319C83-TE LCKREF∗ Block Diagram LBEN SDOUT TX0-9 10 D Q Pin P/S Conv. Sout SDOUT∗ REFCLK REFCLK (106.25M) TX_PLL LCLK (106.25M) TCLK (1.0625G) LPF_TX0...